WORKING PROCEDURE IN STEPS:
1. Power up the Experimental Mother Module using 9V – 12V and give the GND
connection.
2. For each Sensor Modules, connecting the +5V and GND Connection from the
EMMT to the respective Sensor Modules.
3. Each SENSOR Modules getting the respective Sensor input from the
“SENSOR INPUT” section in the EMMT from PIN1 to PIN12 to each 12 types of
sensors.
4. The output for the sensors will be received from the “SENSOR OUTPUT” section
in EMMT respectively from PIN1 to PIN12 to each 12 types of sensors.
Applications:
1. Low voltage applications
2. Charging batteries
3. Automotive applications
4. Aircraft applications
5. Low voltage, low current applications.
- +91 90807 57699
- labelectronics86@gmail.com
